Tile Installation in Johns Island, SC
Porcelain floors that shrug off sand, showers built for marsh air, backsplashes cut clean around every outlet. We tile new construction and older island houses alike.
- 100+ Projects
- Porcelain Specialists
- Licensed in SC
- Free Consultation
Island floors take a beating. Tile is the answer.
About half our Johns Island calls come from houses barely two years old. The builder allowance covered a serviceable floor and a plain backsplash, and now the owner wants the finish the house deserved from the start. Bigger porcelain, a real pattern behind the range, shower walls tiled to the ceiling.
The other half is about grit. Life out here moves between the dock, the yard and the kitchen, and what comes back in on everybody’s feet is sand. It scratches vinyl and wears through a wood finish in the traffic lanes, and does nothing to through-body porcelain.
Marsh air is the third factor and the quiet one. Humidity here does not take a season off, which changes how we build showers and what we specify for grout. Owners weighing a full renovation can also read about our bathroom remodeling in Johns Island.
Rated 5.0 from 8 reviews on Google. Read what our clients wrote.
What We Tile in Johns Island
Complete shower assemblies with sloped pans, membrane and sealed corners before a single tile is set. Curbless entries and floor-to-ceiling walls are the usual island request.
Through-body porcelain in plank and large formats, chosen for how it takes sand and humidity. Substrate flattened first, tiles leveled with clips, nothing rocking underfoot.
Slab-look porcelain, stacked subway and hand-glazed tile behind the range. Most island kitchens are finished inside two days.
Builder-grade flooring, old adhesive and failed shower pans come out cleanly and leave with us. What stays behind is flat, dry and ready to tile.
The island is hard on finishes. We build for that.
Salt in the air, sand on the floor, humidity above seventy percent for weeks. Those three facts settle our material list on Johns Island before anybody opens a sample box. Through-body porcelain keeps its color when grit wears at the surface, because the color runs all the way down.
Grout is where most island installations start to look tired. We hold the water ratio identical batch to batch so the color cures uniformly, tool every joint to the same depth, and use a high-performance grout in wet areas.
For large-format work we run a straightedge across the floor, flatten what needs it, and set with clips so the surface reads as one plane. In a raised-foundation house that step is not cosmetic. It keeps tile from cracking when the framing moves in August heat.
Four steps, zero surprises.
01 / Walkthrough and Measure
We come out to the island, walk the rooms and look hard at whatever the tile has to sit on. The visit and the estimate are free.
02 / Written Proposal
Materials, prep, labor and dates arrive in one document with a single total. It holds unless you change the scope.
03 / Prep and Setting
Demolition, flattening, waterproofing in the wet areas, then tile in the layout we agreed on. Backsplashes take 1 to 2 days.
04 / Grout, Clean and Sign Off
We grout, seal what needs sealing and check every joint alongside you. Then the warranty is registered and the site is yours.
Durability is not a promise. It is built into every tile we lay.
One Year of Labor Coverage
All setting labor on your Johns Island project is covered for a full twelve months. If a tile sounds hollow or a joint opens up, one call brings us back across the bridge.
3-Year Coverage on Waterproofing
Membrane, pans, crack isolation and leveling systems carry a three year warranty. They are the parts you paid for and will never once look at.
Getting back to the island is a short trip and warranty visits are not billed. Waterproofing always comes attached to an installation, because a membrane with no tile over it protects nothing.
Tile questions from Johns Island homeowners
Three things move the number: how much has to come out first, how flat the surface is once bare, and the size and pattern of the tile going down. Large-format porcelain costs more to set than 12 by 24 because the substrate has to be closer to perfect. One written figure follows the measure.
Backsplashes take 1 to 2 days and can sometimes start the same week you call. Shower and bathroom tile sits inside the remodel schedule: 3 days for a small bath, 4 to 5 for a medium, 6 to 7 for a large one. Floors depend on square footage and prep.
Through-body porcelain, without much argument. It absorbs almost no water, and because the color runs through the body, sand scratches never show as pale lines. Marble still works beautifully in a powder room, it simply wants sealing and a mild cleaner.
Physically yes, practically it is a poor trade. You raise the floor at every threshold, bond new tile to whatever the last installer did, and seal in any moisture problem underneath. We take the old tile out first.
We do, from the Maybank Highway corridor out to River Road, Bohicket and the Kiawah River side. Our crew is on the island regularly. Nothing extra goes on the quote for the trip.
Nearby service areas. We also install tile in Mount Pleasant, Summerville and Daniel Island, and we handle bathroom remodeling in Johns Island. For the full metro area, see tile installation in Charleston, SC.
Let us talk tile for your Johns Island house.
Free measure, written pricing, and porcelain chosen for the way island life actually treats a floor.
Tile installation on Johns Island and the greater Charleston area · Licensed & Insured in South Carolina